I'd like to play while charging the controller and I also personally much prefer the usual Nintendo layout so figuring out how to use Switch mode while connected would be ideal. The Xbox SN30 pro grabbed my attention and after doing a bit of research just found out it doesn't support input.
Has there been any significant firmware after the product is released that greatly improves its compatibility. I mostly play emulators like pass, Ciara etc and was thinking if this controller is worth it.
Should I buy a SN30 PRO USB to play some indie games (specifically) on PC? It also doesn't happen on Bluetooth when I go into the steam settings and use the Xbox configuration option.
I did also confirm with the ultimate software that the firmware is up to date and all the buttons are correctly bound, and I know it works because I flipped the sticks... The charger has been disconnected for several hours now, the green status lights are all off but for some reason the red LED persists.
Play with your favorite controller using this 8BitDo wireless USB adapter. The versatile design and USB connectivity let you use a variety of wireless controllers to play games on Nintendo Switch, Windows PC, macOS, Raspberry Pis and more.
Featuring advanced Bluetooth connectivity, this 8BitDo wireless USB adapter lets you play games without tangled cables and offers smooth, lag-free response. Comes with customizable button mapping, adjust stick & trigger sensitivity.
It normally took about 10 minutes of work every single time I wanted to play. I already own multiple Xbox One and PS4 controllers, and you're able to use it on the NS, saving you cash as well.
My only gripe is that if you buy 2 like I did they both won't fit on the docking at the same time. I am able to connect my Xbox and Switch Pro controllers without any issues.
I was aggravated at first because I could get it to pair to my controller but wouldn’t work to any of my games. Once I went to 8BitDo’s website under support I found the most recent updated firmware and installed it.
I ordered 4 of these to connect Dual shock 4 controllers to the switch. I used a non-powered 4 hub USB switch; try to get one that has the USB slots aligned vertically and not horizontally, because these 8bitdo adapters are so wide that you may only be able to fit two of these on a 4 slot switch that has the horizontal configuration.
Make sure before you sync to go into the Switch settings and enable the option for “Wired Pro Controller”. All in all, it is working great still, and I also use this adapter to play games on my PC with my PS4 controller as well.
Example, lets say you are playing in your living room, plugs this baby in, boom done, ready to go. Oh, no you forgot to talk to your animal crossing villagers, plug it in, boom done.
While the DUALSHOCK®4 and PS4™ are connected, press the PS button on the controller. You should hear a beep and the controller light should change from orange to white.
The light bar on the controller turns blue when properly paired. If the light bar is not blue or the PS button is not responsive: Try a different USB port on the PS4™ you may need to fully charge your controller.
Press question mark to learn the rest of the keyboard shortcuts View Entire Discussion (5 Comments)/r/ 8BitDo is an unofficial support community for controllers, receivers, mice, and internal controller board replacements made by the company 8BitDo.
The ogx360 is a small circuit board which allows you to use a range of modern USB controllers on the Original Xbox Console. Low level programming with minimal input lag.
Supports 4 players with Genuine and Third Party Microsoft Xbox 360 Wireless Receivers. Ensure it is configured to appear as an Xbox 360 Controller.
What should I do when I plug in the USB adapter to my Switch, it shows the controller is successfully connected, but nothing really happens when I press on any button? If not, go to System Settings on your Switch and turn on ‘Pro Controller Wired Communication’.
It works with Xbox One S/X Bluetooth controllers, Xbox Elite 2 controller, DS4, DS3, Switch Pro, Joyous (including NEW and FC versions), Wii U Pro, Wii remote, as well as all 8BitDo Bluetooth controllers. *Models which are not mentioned above are not compatible with this USB adapter.
It works with Switch, Windows, PS Classic, Android, macOS, Raspberry Pi and Retro freak. *Systems which are not mentioned above are not compatible with this USB adapter.
The analogue sticks on my Xbox One Bluetooth controller drift a bit. Press and hold PS buttons on your PS4 till the controller turns off, then connect the controller to your PS4 via a USB cable, click on ‘OK’ to reconnect them.